A hot water heater is a hard working appliance. Day or evening, it’s creating completely heated water whenever you desire it. So when it all of a sudden is no longer working correctly, many of us have the tendency to overreact.
Luckily a nonfunctioning water heater does not constantly indicate an expensive repair work. Prior to making an emergency call to Water Heater Repair Clearwater FL, we recommend inspecting the issue yourself first.
Clearwater Water Heater Repair Troubleshooting
Check the Pilot Light
For a gas water heater, eliminate the small panel on the bottom of the system and examine to observe if the pilot light is illuminated.
Spark it with a match or lighter to re-ignite it. If it remains lit, the water heater must kick-in and begin operating appropriately.
If the pilot burner on the water heater does not remain ignited, you might have to change the thermocouple or have the burner cleaned.
It seems like part of a space ship, however it’s really an easy system that you can change on your water heater.
Refer to the owner’s handbook. It must have directions for the best ways to eliminate and change the thermocouple.
Shut off the gas prior to taking out anything at all from the water heater.
Using the directions in your individual’s handbook, eliminate the thermocouple by removing it from both sides of the aviator line.
Change the thermocouple on the water heater with a brand-new one that is cut to length.
Turn on the gas and check for leakages, then re-light the pilot light.
Hit the Reset Button
If you have an electric water heater, find the reset button and push it till you hear a click.
If you do not hear a click, or it falls short to reboot the water heater, reset the breaker.
If a breaker reset does not do the technique, you might have to change the thermostat.
Change the Thermostat
Turn off the power to the water heater, and switch over off the breaker it is linked to. You do not desire to electrocute yourself!
Use the owner’s handbook to find the thermostat wires, then detach them.
Eliminate the thermostat and have it checked by a home appliance dealership. If it is malfunctioning, change it.
Change the Heating Element
With the power still switched over off, eliminate the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires far from the heating element.
Eliminate each element of the element and have them checked by a home appliance repair shop. If they are malfunctioning, change them.
Your water heater must be going in no time. If these actions fall short to repair your hot water heater, or if you do not feel at ease doing them by yourself, call Hot Water Heater Repair Clearwater FL.